一. product description
FG series of low-temperature boiling dryer is the pharmaceutical industry commonly used solid preparation production process equipment. With mixing, drying and other functions. FG series boiling dryer is mainly used for medicine, food, chemical and other industries for drying powder or granular materials.
Boiling dryer is the use of filtered clean air through the heat exchanger convection heat transfer, the air temperature rose to a certain temperature into the host distributor, the valve plate distribution into the boiler, the material from the feeder into the dryer, due to Wind effect, the material in the dryer to form a boiling state, hot air and materials in extensive contact, enhanced heat and mass transfer process, in a relatively short period of time to promote the evaporation of water in the material separation. The device is generally negative pressure operation. Equipment from the air filter, heater, the host, expected car, clean room, connecting duct, fan, muffler and other components. For wet granulation and powder materials drying. Air filter by the beginning, in the filter. Heater by Φ18 × 2 stainless steel tube around the aluminum fins, the heat transfer quickly, long service life. Host wall thickness 3mm, using a unique spherical mixing mechanism, the transmission balance, not plot. Dusting dual-cylinder shaking the way bags, cleaning more thoroughly. Connect duct material thickness 2.0mm. Silencer to reduce fan noise, can effectively improve the working environment.
Second, the main features:
1, using the button control panel;
2, the fluidized bed is a circular structure, to avoid dead ends.
3, equipment processing a wide range of adaptable to different materials, significant drying effect;
4, wider than the traditional horizontal XF boiling dryer fluidization range;
5, can handle some wet, sticky or particle size distribution of a wider range of particles.
6, the bed set stirring device to avoid the wet material reunion and drying process formed in the ditch.
7, the entire device easy to operate, easy to disassemble, easy to clean, in line with "GMP" requirements.
8, good sealing, negative pressure operation, more in line with "GMP" norms.
9, to adapt to low-temperature materials or solvents and low-temperature material drying effect is obvious.

• 
  Chemical materials low temperature boiling dryer-FG-500 type